Gas Station Printers

1. Start operation

Always check whether the cable, power line, cipher line and card reader are connected. Whether the work is normal or not, the problem should be maintained in time.

2. Credit card

Credit card and receipt: the customer will sign on the "merchant deposit and root association", the "cardholder stub" will be handed to the customer, and the "merchant's root" operator will be entrusted to the settlement center. You must not lose the receipt. Note: whether the bank POS machine receives the money, it takes the ceceipt ticket as the payment standard.

3. Credit card operation

The bank card has three kinds of credit card operation: 1. IC chip card: insert the IC card chip face down, gently insert the card interface, wait for the screen to display the card number and do the operation again, and do not dial the IC card in the process of transaction. 2. magnetic card: put magnetic strip of the magnetic card down, in accordance with the direction indicated by the card slot, along the card. 3. When using a bank card with flicker function, the position of the bank card chip is facing the induction zone of the card machine (the induction area of the Internet POS is marked on the left side of the card machine, and the sensing area of the mobile POS is at the screen of the card machine).

4. Settlement

Settlement: the settlement of all transactions over the last settlement point to the current settlement time, including the balance sheet of the printing and settlement and the details of the settlement. Once the settlement is made, the transaction records before the card machine will be all "clean". The total bill of settlement and the details of the settlement should be checked and checked with the credit card small ticket during the corresponding settlement, and be handed over to the clearing center together after the check is checked.

5. The installation of printing paper

Using a single type of thermosensitive paper, you should pay attention to the heat sensitive side of the paper cutter and leave out a few centimeters of printed paper outside when installing. Close the cover and fasten the paper box, then gently pull the print paper, and confirm that the printing paper is fastened. Then use the paper cutter to tear off the extra printing paper outside the printer.